3&4 Jaw Direct Mount D1 Camlock Chucks

advantage:extra working capacity on the lathe due to a shouter overall length with the integral camlock mount

3&4 Jaw Direct Mount  D1 Camlock Chucks

The advantage of using a direct mount chuck is extra working capacity on the lathe due to a shouter overall length with the integral camlock mount.

The chucks of this type are mounted directly to flange type spindle nose with studs for cam locks.The structure of the jaws are as same as the ones of cylinder centre mounting three-jaw seld centring chucks

3-Jaw direct mounting self centering chucks

Chuck Dia.	Spindle	Thru Hole	Model No.
6"/160mm	D1-3	1.575"/40mm	429-3063
6"/160mm	D1-4	1.575"/40mm	429-3064
6"/160mm	D1-5	1.575"/40mm	429-3065
8"/200mm	D1-4	1.969"/50mm	429-3084
8"/200mm	D1-5	1.969"/50mm	429-3085
8"/200mm	D1-6	1.969"/50mm	429-3086
10"/250mm	D1-5	2.756"/70mm	429-3105
10"/250mm	D1-6	2.756"/70mm	429-3106
10"/250mm	D1-8	2.756"/70mm	429-3108
12"/325mm	D1-11	3.937"/100mm	429-3121
12"/325mm	D1-6	3.937"/100mm	429-3126
12"/325mm	D1-8	3.937"/100mm	429-3128
15"/380mm	D1-11	5.11"/130mm	429-3151
15"/380mm	D1-8	5.11"/130mm	429-3158

4-Jaw Independent mounting with studs for cam locks

Chuck Dia.	Spindle	Thru Hole	Model No.
6"/160mm	D1-3	1.771"/45mm	429-4082
8"/200mm	D1-3	2.165"/55mm	429-4083
8"/200mm	D1-4	2.165"/55mm	429-4084
8"/200mm	D1-5	2.165"/55mm	429-4085
10"/250mm	D1-4	2.756"/70mm	429-4104
10"/250mm	D1-5	2.953"/75mm	429-4105
10"/250mm	D1-6	2.953"/75mm	429-4106
12"/250mm	D1-6	3.740"/95mm	429-4126
12"/250mm	D1-8	3.740"/95mm	429-4128
16"/400mm	D1-8	4.921"/125mm	429-4168